SHARKY FS 473

ULTRASONIC FLOW SENSOR

Application

The ultrasonic flow sensor can be used for flow measuring in local and district heating / cooling systems.

Features

Dynamic range (DR) of up to 1:250 (q_i:q_p) in class 2 (depends on meter size), standard 1:100
Extreme low power consumption --> longer battery lifetime
Approved according EN 1434 and MID in class 2 and 3 and PTB K 7.2 (cooling)
High long term stability
Applicable for different calculators with impulse input
Continuous time-correct pulses - no pulse packages
Free selectable impulse values
The temperature range depending on the applicaton up to 5 ... 150 °C
Battery or external power supply
Specific housing for falling and rising pipes

SHARKY FS 473

Application		Heating - cooling
Approval		MID (DE-07-MI004-PTB022) and PTB K 7.2 for cooling (22.76/10.01)
Ambient class		EN 1434 class C / MID class E2 + M2
Ambient temperature	°C	5 ... 55 (<35 °C have a positive lifetime effect)
Battery supply		3.0 VDC battery - up to 12 years lifetime
External supply		3.0 ... 5.5 VDC
Mounting position		Any position
Protection class		Heating: IP 54; heating potted: IP 65; cooling: IP 65
Interfaces		Open Collector pulse output¹ - output for testing and communication²
Volume pulse value³		10 ml ... 5000 l/pulse (depending on sensor sizes and supply)
Cable length of impulse cable		2.4 m (4.9 or 9.9 m optional)
Material of the flow sensor body		Brass (q_p 0.6 ... 100 m³/h), spheroidal cast iron (q_p 15 ... 100 m³/h)

¹ The pulse output can be choosen without galvanic isolation (standard) or with galvanic isolation (only with battery supply). The flow sensor has by default a 4-wire impulse cable.
² The flow sensor can either emit a high resolution test pulse (standard) or communicate via the same output. By using an adapter the flow sensor can be read via the HYDRO-SET software.
³ The pulse duration is between 1 and 250 ms. It depends on the pulse value and on the nominal flow rate q_p.
Standard pulse values: 1, 2.5, 10, 25, 100, 250 l/pulse

Reach

Information pursuant to Article 33 (1) of Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006:
This product series contains components with the following substances in a concentration of more than 0.1% weight by weight (w/w):
- Lead (CAS no.: 7439-92-1)
- Lead titanium zirconium oxide (CAS no.: 12626-81-2)
- 1,2-dimethoxyethane (CAS no.: 110-71-4)

Temperature range

Temperature range heating - battery supplied	°C	5 ... 90 / 5 ... 105¹
Temperature range heating - external supplied	°C	5 ... 105 / 130 / 150 (depends on meter size and material)
Temperature range cooling - battery supplied / external supplied	°C	5 ... 50 / 5 ... 90

¹ Only in rising or falling pipes or tilted horizontal installation

Technical data

Nominal flow rate	q_p	m³/h	0.6	1.5	1.5	2.5	6	6	6	10	15	25	40	60	100
Nominal diameter	DN	mm	15	15	20	20	25	32	40	40	50	65	80	100	100
Overall length	L	mm	110	110	130	130	260	260	150	300	270	300	300	360	360
Starting flow rate		l/h	1	2.5	2.5	4	10	10	10	20	40	50	80	120	120
Minimum flow rate (DR 1:250)	q_i	l/h	6	6	6	10	24	24	-	40¹	60¹	100¹	160¹	240¹	400¹
Minimum flow rate (DR 1:100)	q_i	l/h	6	15	15	25	60	60	60	100	150	250	400	600/1200²	1000/1200²
Minimum flow rate (up side down installation)	q_i	l/h	6	6	6	10	24	24		100	150	250	400	1200	1200
Maximum flow rate	q_s	m³/h	1.2	3	3	5	12	12	12	20	30	50	80	120	120
Overload flow rate		m³/h	2.5	4.6	4.6	6.7	18.4	18.4	18.4	24	36	60	90	132	132
Pressure loss at q_p	Δp	mbar	95	120	75	100	128	128	190	140	140	75	80	75	210
Temp. range heating - brass body		°C	5 ... 130	5 ... 130	5 ... 130	5 ... 130	5 ... 150	5 ... 150	5 ... 150	5 ... 150	5 ... 150	5 ... 150	5 ... 150	5 ... 150	5 ... 150
Temp. range heating - spheroidal cast iron body / brass PN 40		°C	-	-	-	-	-	-	-	-	5 ... 105	5 ... 105	5 ... 105	5 ... 105	5 ... 105
kv value (q_p² (m³/h) = kv² x Δp (bar))			1.95	4.33	5.48	7.91	16.77	16.77	13.76	26.73	40.09	91.29	141.42	219.09	218.22

¹ Valid for horizontal installation only
² Up side down installation

Dimensions thread version

Nominal flow rate	q_p	m³/h	0.6	1.5	1.5	2.5	6	6	6	10	15	25	40	60	100
Nominal diameter	DN	mm	15	15	20	20	25	32	40	40	50	65	80	100	100
Overall length	L	mm	110	110	130	130	260	260	150	300	270	300	300	360	360
Overall length with coupling	L2	mm	190	190	230	230	380	380	-	440	-	-	-	-	-
Height	H	mm	14.5	14.5	18	18	23	23	33	33	-	-	-	-	-
Height	H1	mm	54.5	54.5	56.5	56.5	61	61	61	66.5	-	-	-	-	-
Length of electronic	L1	mm	90	90	90	90	90	90	90	90	-	-	-	-	-
Width of electronic	B	mm	65.5	65.5	65.5	65.5	65.5	65.5	65.5	65.5	-	-	-	-	-
Connection thread on meter		Inch	G¾B	G¾B	G1B	G1B	G1¼B	G1½ B	G2B	G2B	-	-	-	-	-
Connection thread of coupling		Inch	R½	R½	R¾	R¾	R1	R1¼	R1½	R1½	-	-	-	-	-
Operating pressure	PN	bar	16/25	16/25	16/25	16/25	16/25	16/25	16/25	16/25	-	-	-	-	-
Weight		kg	0.6	0.6	0.61	0.61	1.35	1.35	1.52	2.6	-	-	-	-	-

Dimensions flange version

Nominal flow rate	q_p	m³/h	0.6	1.5	1.5	2.5	6	6	6	10	15	25	40	60	100
Nominal diameter	DN	mm	15	15	20	20	25	32	40	40	50	65	80	100	100
Overall length	L	mm	110	110	130	130	260	260	150	300	270	300	300	360	360
Height	H	mm	-	-	-	-	50	62.5	-	69	73.5	85	92.5	108	108
Height	H1	mm	-	-	-	-	61	61	-	66.5	71.5	79	86.5	96.5	95.5
Length of electronic	L1	mm	-	-	-	-	90	90	-	90	90	90	90	90	90
Width of electronic	B	mm	-	-	-	-	65.5	65.5	-	65.5	65.5	65.5	65.5	65.5	65.5
Flange dimension	F	mm	-	-	-	-	100	125	-	138	147	170	185	216	216
Flange diameter	D	mm	-	-	-	-	114	139	-	148	163	184	200	235	235
Hole circle diameter	K	mm	-	-	-	-	85	100	-	110	125	145	160	180¹ / 190	180¹/ 190
Screwhole diameter	D1	mm	-	-	-	-	14	18	-	18	19	19	19	19¹ / 22	19¹ / 22
Operating pressure	PN	bar	-	-	-	-	16/25/40³	16/25/40³	-	16/25/40³	16/25/40³	16/25	16/25/40³	16/25	16/25
Number of screwholes		pcs	-	-	-	-	4	4	-	4	4	8	8	8	8
Weight brass body²		kg	-	-	-	-	3.35	4.65	-	6.6	7.45	9.45	11.1	16.9	16.9
Weight spheroidal cast iron body²		kg	-	-	-	-	-	-	-	-	6.31	8.08	10.01	15.76	15.75

¹ Values for PN 16 housing
² Meter with battery and 2.4 m cable length of the pulse cable
³ Only up to 105 °C

Pressure loss graph / typical error graph

Pressure loss graph

Typical error graph